A Greenhouse Wiggle Wire (2m) is a high-strength spring wire engineered to lock poly greenhouse film, insect netting, and shade cloth tightly into a locking profile channel. Installed inside a 2-meter lock profile, this spring wire grips protective covers firmly along greenhouse arches, sidewalls, and end-walls without tearing or puncturing the material.

Features

-Durable construction made from spring steel coated with UV-resistant plastic or rubber to prevent rust and fabric abrasion
-Flexible zig-zag shape engineered to apply constant outward tension within the locking channel
-High wind resistance that holds protective covers securely under heavy weather and strong winds
-Multi-layer capability designed to hold up to two or three layers of film or netting in a single channel
-Reusable design allowing simple installation, removal, and re-securing during cover maintenance or replacement

Benefits

-Protects greenhouse films and netting from friction damage, tears, and wind displacement
-Eliminates the need for damaging fasteners, nails, or permanent adhesives
-Creates a continuous, wind-proof seal along the structure to prevent pest infiltration
-Provides long-lasting hold for commercial greenhouses, nurseries, and farm shade structures
-Quick and easy to install or remove without specialized heavy equipment

Specifications

-Product Type: Greenhouse Wiggle Wire / Lock Spring Wire
-Length: 2.0 Meters per piece
-Material: Spring Steel with PE/PVC Plastic Coating
-Diameter: Standard 2.0mm – 2.5mm steel core
-Color: White / Black / Green (varies by batch)
-Compatibility: Compatible with standard 2m and 4m greenhouse locking profile channels

Agricultural Applications

-Greenhouse poly film roof and side-wall securing
-Insect net and shade net channel locking
-Nursery and seedling house enclosure fixation
-Tunnel greenhouse film installation
-Farm shade and vent structure management

Installation Method

-Place the greenhouse film, insect net, or shade net evenly over the open locking profile channel
-Insert one end of the 2m wiggle wire into the channel
-Push the wire into the channel using a simple up-and-down zig-zag motion until the entire length is locked in place
-Ensure the covering is pulled smooth and taut as you work along the channel

Storage & Care

-Store in a dry, covered area to preserve the protective plastic coating
-Avoid bending or crimping the spring wire out of shape before installation
-Inspect wires during seasonal maintenance and replace any wire showing core corrosion or damaged coating